BASINOL^® MW 24

Product profile:

• free from boron, amine containing coolant concentrate
• free from formaldehyde donators

Product properties / advantages:

• produces stable emulsions in make-up water from 10 °dH to 30 °dH; emulsion in use is stable up to 60 °dH
• good cooling and detergency properties
• good corrosion protection

Application:

• Grinding // During implementing the polishing operation
• general machining

Remarks:

Correct preparation of a fresh emulsion is ensured by slowly pouring the concentrate into water while stirring continuously. Alternatively, an automatic mixing device may be used.

The recommended concentration depends on the application and the materials to be machined:

Grinding: from 5 % 

General machining from 7 % 

The concentration of the in-use emulsion may be checked using a refractometer. 

The refractometer reading must be multiplied by the refractometer factor to arrive at the concentration.

Based on current knowledge BASINOL MW 24 could be used for processing of most aluminium alloys. 

However the tendency of the alloy to stain should be checked in advance

All information on safe and proper handling can be found on the SDS.

For further product information, please contact our sales representative or technical support.